Building your own home is an exciting job. You get to decide what the layout should be like, what should be the color of the walls, how exquisite the interiors should be and all those little details which makes the house, a home. The following overview outlines the typical steps in home construction Kelowna and once you get familiar with the process, you can work closely with the custom home builders Kelowna, to give the house a personal touch and convert it into a dream abode. One thing that you should keep in mind is that home building procedures vary from region to region and builder to builder, especially if you want to build an elaborate custom home. Be sure to ask your builder about his specific policies and procedures.
Let’s discuss the steps involved in custom home construction in Kelowna:
* Prepare site and pour foundation: The crew levels the site, puts up wooden forms to serve as a template for the foundation, and digs the holes and trenches. If the home has a full basement, the whole is dug, footings and foundation walls are formed and poured. Once concrete is poured into the holes and trenches, it’ll need time to cure. After that the crew will apply waterproofing membrane to the walls, install drains and sewers and any other plumbing which is required.
* Complete rough framing: The floor systems, walls and roof systems are completed and windows and exterior doors are installed.
* Complete rough plumbing, electrical wire lining and HVAC: Once the skeleton is finished, the electrical and plumbing contractors start running wires and pipes through the interior walls.
* Install insulation: Insulation plays a key role in creating more comfortable and consistent indoor climate and improves the energy efficiency significantly. The most common types of insulation used in new homes is fiberglass, cellulose and foam.
* Complete drywall and interior textures: Drywall is hung and taped so the seams between the boards aren’t visible and drywall texturing is completed. The primary coat of pain is applied after taping is complete. custom home builders Kelowna then begin installing exterior finishes such as brick, stucco, stone and siding.
* Finish interior trims and Install exterior driveways and walkways: Interior doors, baseboards, window sills, stair balusters along with other decorative trims like cabinets, vanities etc. are installed. Walls get a finish coat of paint and wallpapers are applied wherever applicable. Exterior driveways, walkways and patios are formed at this stage.
* Install hard surface flooring and countertops: Ceramic tile, vinyl and wood flooring are installed as well as countertops. Exterior finish grading is then completed to ensure proper drainage.
* Finish mechanical trims and install bathroom fixtures: Light fixtures, outlets and switches are installed electrical panel and HVAC are completed. Sinks, toilets and faucets are put in place.
* Finish flooring and exterior landscaping: Mirrors, shower doors and carpeting is installed and after the final clean up, trees, shrubs and grass are planted and the exterior landscaping is completed.
* Final walk through: The builder will walk you through your new home and get you acquainted with its components and features along with explaining your responsibilities for maintenance and upkeep.
For further detail about home construction Kelowna.Please visit the website.
No comments:
Post a Comment